Introducing the MiniMax® System Modular Engine
Compartment Heaters. More heat Less space. Introducing the
first expandable automatic engine compartment heater system.
the latest option to winterizing your engine. Easy to mount
(All mounting hardware included) Plug in up to 3 separate
Compact 400W heaters. Everything is Pre-wired. "Plug and Play"
Technology. Automaically turns on when temperature drops below
40 degrees...
The MiniMax™ System allows you to mount
the controller anywhere in your engine compartment. The
separate heating unit(s) can be mounted in any direction –
Port or Starboard, Top or Bottom, Upside Down, Vertical or
Horizontal- the choice is yours. You can have up to three
heater elements, (1,200 watts per controller) to suit your
particular custom requirements.
Features
- Small Size, Installs Anywhere
- Automatically turns On and Off
- Easily Expands up to 1200W
- “Plug and Play” Technology
- Integral Quick Release Mount
- Economical – Low Cost per Watt
- Built-in Overheat Protection
- High Output Heater
- Safe Touch Free Connections
- Press-to-Test with Led Indicator
- Advanced Solid State Controller
- Helps Control Condensation
- Lifetime Service Warranty
- Pre-wired and ready to plug in!
- Innovative “Stow and Go” clips are included
Unit and Power Output Supply Voltage Installation 400 Watts
heating element 110 Volts •Pre-wired and ready to plug in!
•Mount anywhere in Engine Compartments
|
Boatsafe BSAT 750 WATT Boat Bilge Heater Now replaced by the 1000 Watt
Heater
Boatsafe® BSAT 750 Marine Bilge Heater. Our top of the line
marine bilge heater provides forced-air heat through a
patented case design to keep your engine compartment safely
above freezing. The Boatsafe® boat heater does this while
maintaining ignition protection. When the boat heater’s sensor
detects an ambient temperature of approximately 45º Fahrenheit
(7.2ºC), it...
Our top of the line marine bilge heater provides
forced-air heat through a patented case design to keep
your engine compartment safely above freezing. The
Boatsafe® boat heater does this while maintaining
ignition protection. When the boat heater’s sensor
detects an ambient temperature of approximately 45º
Fahrenheit (7.2ºC), it turns on and remains on until
the engine compartment reaches approximately 55º
Fahrenheit (12.7ºC).
Boatsafe Jr. 250 WATT Boat Bilge Heater Now replaced by the 300 and
600 watt heaters
Have a smaller boat or engine? Check out our
Boatsafe® Jr. Model. the perfect marine engine heater
for all smaller vessels.
Benefits of using
Boatsafe® marine boat heaters
Boatsafe® Jr. 250 Marine Bilge Heater Our smaller
high quality marine bilge heater provides forced-air
heat through a patented case design to keep your
engine compartment safely above freezing. The
Boatsafe® boat heater does this while maintaining
ignition protection. When the boat heater’s sensor
detects an ambient temperature of approximately 45º
Fahrenheit (7.2ºC), it turns...
Also Available the NEW Boatsafe
1000 WATT Boat Bilge Heater
|
Xtreme boat
heaters
300, 400 and 600 watts.
compact design allows for easy installation in the
engine compartment /bilge of ANY size boat.
Forced air convection boat heaters for more
accurate climate control
Automatic thermostat turns heater on at 40°F
and off at 52°F +/-3°
Safe through temperature limiting
characteristics thermal overload protection set at 205°C
(heater will not overheat)
Dynamic, self regulating, and therefore energy
efficient and economical
High power to size ratio
Pre-wired
Long lifetime /reliable
Built with UL, SA, CE, and VDE recognized
components
Fully anodized inside and out for superior
protection
Recommended operating temperature is from -10°c
to 80°c (or 15°f to 180°f)
Full 1 year warranty
Power cords on
all 3 models are 20 ft long with 3 prong cord plug.
Xtreme Boat Bilge Heaters. Models come in small=Xheat
(300w), medium=XXheat
(450w), and large=XXXheat
(600w)
|
